Post By RelatedRelated Post
Manufacturer: Amati
Vehicle type: civic
Engine type: coal-steam
Country : USA
Model scale: 1:144
Hello everybody, comrades! I want to show you my wooden steam boat from the Italian manufacturer Amati. At the moment it is the only wooden ship at my pier.
I was building it already quite long ago, about 2-3 years ago, I cant remember exactly.
During the construction I often felt like I was at school at technology lessons, where I was sawing something, sand-papering, there were some wood-blocks, strips of board, rails… All in all, it was pretty funny.
The content of the box of the ship model
Generally speaking, I was building this cruise ship model without problems, strictly following the instructions, well, somewhere not very strictly In short, I was building from a box. And in the box, actually, there were wood-blocks, strips of board, rails, and a pair of veneers with laser cut parts. And another big piece of wood which manufacturers have decided, apparently not bothered, to call the housing. In the set there were a lot of different small things ready to be used (eyelets, hooks, pipes, windows, etched fences and other things of metal and wood) that I personally was very pleased with. After the construction a lot of it all was left, and all sorts of different bars, too. It will be useful.
The only thing that upset me was the lack of a stand in the set, and I still havent made anything worthy myself – the ship turned out to be heavy, and nothing suitable was found at hand.

Additional materials I used for construction

During the construction I used the glue Tait Bond (American PVA) and Zap-a-gap (US superglue, which immediately glues everything, from metal to fingers).
I was painting with a brush, with Tamia paint (for my stupidity), spent a lot of paint.
Incidentally, on the box the manufacturer marked the scale as 1:150, but, IMHO, something is not right here.
In short, that’s what happened. Beat me.



























Beautiful and perfect, congratulations
How much does it cost for the kit in amercan
That’s a fabulous example of this kit. Well done! I particularly like the double railing you’ve fitted around the top – was that really 1x1mm walnut? I had to switch to lime and even that with steaming was a struggle.
I found the kit poorly conceived, as there is conflict between the photos on the box and the instructions. The curves of the stern decks don’t combine as they should and had to be adjusted, and some minor details are omitted. A photobook (as used my many other model companies) would make a massive difference. Are the gangways fixed to the deck? I can’t see how the rear ends are held down…